null Skip to main content

Phone/Text: (602) 692-8333 Email: info@readygomro.com

Zoom the image with the mouse

Simplex Grinnell

Tyco Simplex Grinnell 4098-9714 TrueAlarm Photoelectric Smoke Sensor

Product Code: RTG-0945244
UPC: 683195000000
Availability: In-Stock Today
$59.40
Tyco Simplex Grinnell 4098-9714 TrueAlarm Photoelectric Smoke Sensor - TrueAlarm photoelectric sensors use a stable, pulsed infrared LED light source and a silicon photodiode receiver to provide consistent and accurate low power smoke sensing. Seven levels of sensitivity are available for each individual sensor, ranging from 0.2% to 3.7% per foot of smoke obscuration. Sensitivities of 0.2%, 0.5%, and 1% are for special applications in clean areas. Standard sensitivities are 1.5%, 2.0%, 2.5%, 3.0%, and 3.7%. Application type and sensitivity are selected and then monitored at the fire alarm control panel.* The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow. Digital Communication of Analog Sensing. TrueAlarm analog sensors provide an analog measurement digitally communicated to the host control panel using Simplex addressable communications. At the control panel, the data is analyzed and an average value is determined and stored. An alarm or other abnormal condition is determined by comparing the sensors present value against its average value and time. Intelligent Data Evaluation. Monitoring each sensors average value provides a continuously shifting reference point. This software filtering process compensates for environmental factors (dust, dirt, etc.) and component aging, providing an accurate reference for evaluating new activity. With this filtering, there is a significant reduction in the probability of false or nuisance alarms caused by shifts in sensitivity, either up or down. Control Panel Selection. Peak activity per sensor is stored to assist in evaluating specific locations. The alarm set point for each TrueAlarm sensor is determined at the host control panel, selectable as more or less sensitive as the individual application requires. Timed/Multi-Stage Selection. Sensor alarm set points can be programmed for timed automatic sensitivity selection (such as more sensitive at night, less sensitive during day). Control panel programming can also provide multi-stage operation per sensor. For example, a 0.2% level may cause a warning to prompt investigation while a 2.5% level may initiate an alarm. Sensor Alarm and Trouble LED Indication. Each sensor bases LED pulses to indicate communications with the panel. If the control panel determines a sensor is in alarm, or is dirty or has some other type of trouble, the details are annunciated at the control panel and that sensor bases LED will be turned on steadily. During a system alarm, the control panel will control the LEDs such that an LED indicating a trouble will return to pulsing to help identify the alarmed sensors. - Simplex Grinnell - TE Connectivity - 4098-9714 - 0742444CN
Choose Options:
Condition (Choose One)
Current Stock
Price
Items added successfully!

Tyco Simplex Grinnell 4098-9714 TrueAlarm Photoelectric Smoke Sensor

$59.40

Tyco Simplex Grinnell 4098-9714 TrueAlarm Photoelectric Smoke Sensor

$59.40
 
Tyco Simplex Grinnell 4098-9714 TrueAlarm Photoelectric Smoke Sensor - TrueAlarm photoelectric sensors use a stable, pulsed infrared LED light source and a silicon photodiode receiver to provide consistent and accurate low power smoke sensing. Seven levels of sensitivity are available for each individual sensor, ranging from 0.2% to 3.7% per foot of smoke obscuration. Sensitivities of 0.2%, 0.5%, and 1% are for special applications in clean areas. Standard sensitivities are 1.5%, 2.0%, 2.5%, 3.0%, and 3.7%. Application type and sensitivity are selected and then monitored at the fire alarm control panel.* The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow. Digital Communication of Analog Sensing. TrueAlarm analog sensors provide an analog measurement digitally communicated to the host control panel using Simplex addressable communications. At the control panel, the data is analyzed and an average value is determined and stored. An alarm or other abnormal condition is determined by comparing the sensors present value against its average value and time. Intelligent Data Evaluation. Monitoring each sensors average value provides a continuously shifting reference point. This software filtering process compensates for environmental factors (dust, dirt, etc.) and component aging, providing an accurate reference for evaluating new activity. With this filtering, there is a significant reduction in the probability of false or nuisance alarms caused by shifts in sensitivity, either up or down. Control Panel Selection. Peak activity per sensor is stored to assist in evaluating specific locations. The alarm set point for each TrueAlarm sensor is determined at the host control panel, selectable as more or less sensitive as the individual application requires. Timed/Multi-Stage Selection. Sensor alarm set points can be programmed for timed automatic sensitivity selection (such as more sensitive at night, less sensitive during day). Control panel programming can also provide multi-stage operation per sensor. For example, a 0.2% level may cause a warning to prompt investigation while a 2.5% level may initiate an alarm. Sensor Alarm and Trouble LED Indication. Each sensor bases LED pulses to indicate communications with the panel. If the control panel determines a sensor is in alarm, or is dirty or has some other type of trouble, the details are annunciated at the control panel and that sensor bases LED will be turned on steadily. During a system alarm, the control panel will control the LEDs such that an LED indicating a trouble will return to pulsing to help identify the alarmed sensors. - Simplex Grinnell - TE Connectivity - 4098-9714 - 0742444CN
 
Ready Go MRO offers products in both "new" and "refurbished" conditions. Ready Go MRO is not an authorized distributor for this brand. Our standard 90-day warranty is included with all purchases. Please see our Warranty, Shipping, and Returns Page for full warranty and return details. https://readygomro.com/warranty-info-90-day/
 
 
Content of Plugin - Documnent form Freshclick
 
Tyco Simplex Grinnell 4098-9714 TrueAlarm Photoelectric Smoke Sensor

Frequently Asked Questions

&nbsp

We offer available services through FedEx, UPS, USPS, and DHL. Most products can be ordered via next-day-air service.

&nbsp

Yes. We can ship to your client.

Please add a note during checkout or call or email us to let us know. We can also include your packing slip and/or your shipping label upon request.

&nbsp

All of our options are displayed during checkout. We accept a wide variety of payments. We accept standard Visa, Mastercard, and American Express payments (along with similar options for international customers).

We also offer Amazon Pay, Apple Pay, and PayPal. Wire/ACH payment information is available upon request. And we also use niche B2B platforms like Bill.Com. If you have any other requests, please reach out to us.

&nbsp

Typically, we do not offer Net Terms. We prefer orders be prepaid. If Net Terms are necessary, please reach out to us.

&nbsp
  1. First, please sign up for an account on our website.
  2. Second, please email your local exemption form to info@b2esurplus.com.
  3. Typically, we respond to tax-exempt requests within 10-15 minutes.
&nbsp

We offer a mix of new and used products. Both product conditions are listed on the product page.

&nbsp

Yes. We do our best to keep our inventory control very accurate. If you'd like to verify stock, please reach out to us via phone/text or email. If there are any stock errors, we will let you know immediately.

&nbsp

Our refurbished products are usually used. They are cleaned, tested, and include a 90-day warranty.

&nbsp

We do not represent any manufacturers. We are also known as "discount / overstock / surplus", "grey market", a "non-authorized stocking distributor", or "independent distributor".

We offer a 90-day warranty on all sales through Ready Go MRO. Typically, the manufacturer will not warranty products that we resell.

&nbsp